Speedhut Fuel Level Sender Bedienungsanleitung PDF herunterladen

To Chassis

Ground

SEND

To Power

+12 Volts

You need to supply 12volt

power to the sensor.

To Gauge

For Speedhut gauges with single sensor wire

To Gauge

Ground

SEND

To Power

+12 Volts

You need to supply 12volt

power to the sensor.

To Gauge

Default Revolution and Legacy fuel level gauge is 240Ω (Empty) - 33Ω (Full) Ohms Equivalent

For Revolution and Legacy gauges with included ground wire in harness

Fuel Level Sender Instructions

WARRANTY - Speedhut inc. warrants to the consumer for a period of 5 years from the date of purchase that the product will be free from defects in materials or workmanship.

Speedhut warrants to the consumer for a "LIFE-TIME" that the gauge circuit board will be free from defects in materials or workmanshipPlease contact Speedhut service dept.

If you have a problem with this gauge. [email protected]

72°

68°

80°

68°

Ø 2.125

Fuel Level Bolt Hole Pattern

No Gauge Calibration Necessary (Sender is 240Ω Empty 33Ω Full)

Default Speedhut fuel level gauge is 240Ω (Empty) - 33Ω (Full) Ohms Equivalent

No Gauge Calibration Necessary (Sender is 240Ω Empty 33Ω Full)

Fuel Level sender will automatically calibrate full on rst ll up.

DO NOT TEST IN ANY OTHER FLUID BESIDES GASOLINE AND DIESEL FUEL.

Testing the sender unit in any other uid will damage the unit.

Fuel Level Bolt Hole Pattern 1

Inhaltsverzeichnis

Seite 1 - Fuel Level Bolt Hole Pattern

To ChassisGroundSEND-+To Power+12 VoltsYou need to supply 12voltpower to the sensor.To GaugeFor Speedhut gauges with single sensor wireTo GaugeGroundS

Kommentare zu diesen Handbüchern

Keine Kommentare

Speedhut Fuel Level Sender Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Speedhut Fuel Level Sender herunter. Speedhut Fuel Level Sender User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Speedhut Fuel Level Sender